Today we are going to look at the Champion Series Gaming chair from EWin Racing. These guys make some fabulous gaming chairs that any respectable gamer will instantly fall in love with. I got mine, courtesy of EWin Racing and boy what a treat it is!
EWin Racing Champion Series – Introduction
EWin Racing makes all sorts of gaming chairs and two things immediately stand out when you buy one of their products. First, the construction is superb with full metal body and limited plastics unless it is necessary. Second, the seats are meant for uninterrupted gaming.
The Champion series is comfortable and adjust quickly to your body type thanks to its unique design and ergonomics. Though mine was a sample that I received from EWin Racing, it was surprisingly brand new, which gave me the opportunity to look at the packaging, and that’s where we shall begin the review.
EWin Racing Champion Series – Unboxing
Unboxing the chair reveals an aluminium 5 star base, which is light and doesn’t feel flimsy like some plastic footing of other brands. Removing the base reveals the back rest, which already comes attached to the neck and adjustable lumber support. Almost immediately, I fell in love with the design of the chair. It isn’t “in-your-face”, but it has dramatic ascents running across the backrest and cushions. Remove the back rest, and you get to the accessory box and the seat.
The accessory box has the instruction manual, side covers for the arms, hydraulic system and cover, wheels (they are matched to the chair!), a base platform that lets you go up and down plus the spring for the backrest and a pair of rubber gloves.
EWin Racing Champion Series – Assembly
I began by first putting in the wheels under the base, which is surprisingly simple. You just have to push the wheel heads into the slots on the bottom. No detailed work needed here.
The next step is to attach the back with the seat. Thankfully, Ewin Racing provides four bolts preassembled into the body of the back rest. Use an Allen key to remove those four bolts and keep them aside. On the seat are two flanges to the rear that you then line-up with the back rest such that the four bolts go through the flanges and back into their respective holes. Loosely screw the bolts and tighten all four until the back rest is firmly secured to the seat. (See image below)
Flip the back rest and seat combo over to expose the underbelly of the seat. Once again all necessary bolts are attached, so you just remove those that you need without having to worry about confusing numbers and directions. To attach the tri-stand that connects the seat to the hydraulic and base, just undo the screws that match with the tri-stand’s slots and fix it on nice and tight. (See image below)
To install the hydraulic into the base just drop it in and secure it in place with the hydraulic cover. Then grab the whole chair and drop it over the hydraulic system to finish assembly. All that remains later is to hide the flanges on the seat using the only remaining pair of covers.
EWin Racing Champion Series – What Stood Out
As a whole, the chair boasts a metal construction with high density perforated leather foam and a beaded edge running around the chair with padding on the arm rests that are firm but not too much. Same goes for the seat cushioning and back cushioning that isn’t too soft nor tough. (See image below)
Moving to the bottom, each leg has some amount of rubber padding on the front, so your feet don’t slide off if you like propping them up on the base legs like I do. The wheels are smart in that they don’t need screws to stay in place, so you never have to worry about them coming undone.
Back up to the seat, the lumbar support and neck cushion are surprisingly well designed. They don’t feel like an after though but rather a part of the overall chair. The folks at EWin Racing probably included these cushions right from the beginning of the design. And, if you aren’t human and prefer neglecting the comfy pillows, you can remove both.
The arm rests do go up and down with a range of 800mm, which isn’t bad though a bit of movement to the sides or the front would have been nice. As for the chair itself, it sits 470mm high at its lowest position and can rise to 600mm at its highest. The knob underneath the seat lets you adjust the back rest tension to suit your preference. I like keeping mine at the lowest tension, which is how the chair reached me. (See image below)
The last thing I want to cover is lowering the back. This chair does a complete 180 degree such that you are horizontal on it! Surprisingly, it is handy depending on what you want to do. Playing an intense game that needs your full concentration? Keep the tension high and the back at near vertical. But if you’re going to relax, Netflix and chill then push the handle to fall as far back as you need. Remember that knob to adjust the seat and back rest tension? Well, that’s what comes handy here as you finely balance the tension to suit your preference when tilting back.
EWing Racing Champion Series Gaming Chair Verdict
With plenty of styling options, embroidery choices, and killer looks, there is no doubt that EWin Racing Champion Series is a gaming chair. They may call it an “ergonomic computer gaming office chair, ” but that’s just sugar coating the truth, which is that the Champion Series is a comfortable beast looking gaming chair worthy of being a permanent companion to your gaming rig.